Sliding pocket doors are a stylish and compact solution for pure spaces and small, narrow rooms. The main advantage of this configuration is that the slab moves along the wall when opened, hiding in a niche.
Our assortment includes over 550 Belldinni doors in various finishes (polypropylene, enamel, veneer, or primer), decorative elements, and sizes.
Nominal and actual door height
Nominal and actual door width
Standard sliding pocket door sizes
Considering each homeowner's needs, we offer a wide range of interior door dimensions so that they decorate the doorway and effectively zone space in the house or apartment, saving about 6 square feet compared to a swing opening system.
Single pocket doors
-
Nominal height: 80, 84, 92 ½, and 96''.
-
Nominal width: 18, 24, 28, 30, 32, and 36''.
-
Thickness: 1 ¾ and 1 9/16''.
The most popular slabs are 24 x 80, 28 x 80, 32 x 80, and 36 x 96 inches.
The table shows the standard sizes of Belldinni single pocket doors.
Height 80
Height 84
Height 92 ½
Height 96
Double pocket doors
-
Nominal height: 80, 84, 92 ½, and 96''.
-
Nominal width: 36, 48, 56, 60, 64, and 72''.
-
Thickness: 1 ¾ and 1 9/16''.
The most popular slabs are 48 x 80, 56 x 80, 64 x 80, and 72 x 96 inches.
The table shows the standard sizes of Belldinni double pocket doors.
How to measure pocket doors?
Before purchasing a pocket door, it's crucial to determine the dimensions needed and make sure the wall is suitable for this sliding configuration. Please note that it must not be load-bearing and must not have electrical wiring or plumbing.
If all conditions are met, proceed to the measurements, following our clear and step-by-step instructions.
The tools you need
To determine the door size, you will need the following items:
-
Tape measure.
-
Paper.
-
Pen or pencil.
Choose the most convenient method: you can draw the door opening schematically and put all the measurements on it or fix the values on the corresponding photo on your phone.
Door width measurement
First, use a tape measure to determine the amount of wall space available to the stud. This will be the desired width of your slab. To get the final value, add 1-2 inches to it.
Thus, if the doorway is 27'' wide (the rough opening is 54'' wide), the pocket door should be 28'' wide.
Door height measurement
Measure the height of the rough opening:
-
Place a tape measure on the header on the left side of the opening and measure the height to the floor.
-
Repeat the action in the middle of the doorway.
-
Repeat on the right side.
From the three values, choose the smallest and subtract 4 ½ inches from it to ensure that you can secure a slab that will not mar the flooring when opened and closed.
Thus, if the doorway is 97'' high, the pocket door should be 92 ½'' high.
Measurement check
To avoid confusing calculations, check yourself using the following formulas.
For single pocket doors:
Rough opening width = 2 x door width + 1 inch.
Rough opening height = door height + 4 ½ inches.
For double pocket doors:
Rough opening width = 4 x door width + 2 inches.
Rough opening height = door height + 4 ½ inches.
Size chart for bi-pocket doors
All measurements in the table are in inches.
FAQ
In this section, we have compiled answers to frequently asked questions to make the door sizing process as easy as possible for you.
-
What is the standard pocket door size?
Most popular sizes:
-
For single pocket doors — 24 x 80, 28 x 80, 32 x 80, and 36 x 96''.
-
For double pocket doors — 48 x 80, 56 x 80, 64 x 80, and 72 x 96''.
-
What is the largest pocket door size?
The largest of the standard sizes is 36 x 96''.
-
What is the smallest pocket pocket size?
The smallest of the standard sizes is 18 x 80''. To order a pocket door of a non-standard size, please consult our specialists.
Conclusion
Proper measurements and ensuring the suitability of your wall structure are crucial for a successful installation, whether opting for single or double pocket doors. With this guide, you can confidently navigate the sizing process and find the ideal pocket door. If you have any questions or need assistance, consult our experts. Also, our website offers a convenient configurator with which you can place an order, considering all the parameters.